XK3190－A12(E)
Indicator will turn off automatically to save electricity consumption after no operations for a while. When the
voltage of built in battery decreases to a certain value, indicator will alert and remind user to recharge in
time.
A12(LED) has electricity saving function for the indication. After the weight is stable for a few seconds,
it will indicate a record segment; When there is weight changes, indicator will turn on automatically and
display the weight. When the voltage of built in battery decreases to a certain value, indicator will alert and
remind user to recharge in time.
XK3190-A12(E) indicator has the calibration protection and software tamper-proof function. There is
calibration switch on the hardware and is protected with lead seal. Only when you open the lead seal and
softly touch the calibration switch, the data will be saved. Otherwise, after the restart-up, the calibration data
will recovery to previously saved one. There is software version, software verifying code, calibration counter
and parameter verifying code for legal metrology. This is for relevant metrology bureau to test and control.
CHAPTER 2 INSTALLATION
2.1 FRONT AND BACK VIEW OF THE INDICATOR
To Next Page
Loading...
Need help?
General
