Yara N-Sensor User Manual

Yara N-Sensor V3.10 Operation Manual
Individual tasks can be selected and deselected by touching the check box in the Select
column. By default, all tasks are selected. Use the Select all button to select or deselect
all tasks at once.
Delete all selected tasks. Note that once the command is confirmed, all task
data will be lost and there is no way to retrieve the data files later!
Touch the Send button to send the selected task data to the SensorOffice
batch processing server. When the Send button is pressed the first time, the
location of the CardWriter.exe file needs to be entered
1
. Usually this file is located
in the c:\rns2000\CardWriter\bin directory. Once this has been set properly, it
will not be necessary to be set again.
1
CardWriter is available from http://www.sensoroffice.com free of charge and must be prop-
erly installed on the terminal computer. Contact your local service partner support.
Last revised: 28.01.2009 14:39 Page 27 of 64

Yara N-Sensor Specifications

General

Brand	Yara
Model	N-Sensor
Category	Measuring Instruments
Language	English