Yard force GM A46 - Page 11

10
ASSEMBLY
Fig. 7-2
1. Lift the rear flap with one hand and
then hook the grass catcher to the
rear of the lawn mower.
2. Release the rear flap to secure the
grass catcher in position.
Fig. 7-3
G
G
C
D
E
F
F
Keep the carry handle (D) in line with
its corresponding opening on the
grass catcher upper cover (C), then
insert it into the upper grass catcher
upper cover (C) and fix it with self
tapping screws (G). (Fig. 7-2)
Put the grass catcher upper cover
(C) and the grass catcher lower
case (E) together, ensure that they
join correctly. Fix the upper grass
catcher cover (C) and grass catcher
lower case (E) with cross head
recessed pan head tapping screws
(F). (Fig. 7-3)
C
A
ttaching the grass catcher onto the mower (Fig. 8)
Fig. 8
2
.
3
.