EasyManua.ls Logo

Yard force LM G37A - User Manual

Yard force LM G37A
45 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual of Product 1:
Yard Force GR40 Range 40V 34cm Cutting Width Cordless
Lawnmower with Lithium Ion Battery & Quick Charger, Rear
Roller, 35L Grass Bag - LM G34A - Lawn Mower
User Manual of Product 2:
Yard Force 20V Cordless Pole Hedge Trimmer - extendable,
with Adjustable Head, 41cm Cutting Length, Lithium-ion battery
& charger LH C41A

Table of Contents

Other manuals for Yard force LM G37A

Preview: Instruction Manual
Instruction Manual30 pages

Questions and Answers

  • Q
    qnovakAug 15, 2025
    Why Yard force LM G37A fails to start?
    • B
      Brooke WilliamsAug 16, 2025
      Your Yard force Lawn Mower might fail to start due to several reasons: the safety key might not be inserted (insert the safety key); the battery might not be correctly inserted (remove and reinsert the battery); the mower might be standing in high grass (start the motor on shorter grass or a previously mowed area, adjusting the cutting height if needed); the mower housing might be clogged (clean the housing to allow the blade to move freely); or the battery might be out of power (check and recharge the battery).
  • B
    Bradley CrossAug 19, 2025
    Why my Yard force Lawn Mower won't start?
    • J
      Joshua AndersonAug 19, 2025
      There are several reasons why your Yard force Lawn Mower might fail to start: * The safety key may not be inserted. Ensure the safety key is properly inserted. * The battery might not be correctly inserted. Try removing and reinserting the battery. * The mower could be standing in high grass. Start the mower on shorter grass or an already mowed area, and adjust the cutting height if needed. * The mower housing may be clogged, preventing the blade from moving freely. Clean the housing. * The battery may be out of power. Check and recharge the battery.
  • D
    Dr. Eric CummingsAug 21, 2025
    What to do if Yard force LM G37A Lawn Mower stops working?
    • S
      Shannon BooneAug 21, 2025
      If your Yard force Lawn Mower stops working or loses power, it could be due to a few reasons: the cutting height might be incorrect (adjust the cutting height); the cutting blade might be worn or damaged (replace it with a new blade from a dealer service center); or the battery performance might be decreasing (check the battery performance and charge it if necessary).
  • L
    Lawrence GreeneAug 25, 2025
    What to do if the grass bag is not filling sufficiently on my Yard force LM G37A Lawn Mower?
    • M
      Michael MaloneAug 25, 2025
      If the grass bag on your Yard force Lawn Mower isn't filling sufficiently, consider the following: * The cutting height may be too low. Adjust and increase the cutting height. * The lawn or grass may be wet. Allow the lawn to dry before mowing. * The underside of the mower deck may be clogged. Clean the underside of the mower deck. * The cutting blade may be worn or damaged. Replace it by contacting the customer service centre.
  • G
    Gregory AndersonAug 28, 2025
    How to fix Yard force Lawn Mower vibrating at higher speed?
    • C
      Connor MclaughlinAug 28, 2025
      If your Yard force Lawn Mower is vibrating at a higher speed, it might be due to: * An unbalanced cutting blade. Balance the blade by grinding each cutting edge until they are equal. * A loosened or incorrectly fitted blade. Tighten the blade bolt.
  • K
    Kevin HughesAug 30, 2025
    What to do if Yard force Lawn Mower cuts unevenly?
    • L
      lopezjulieAug 31, 2025
      If your Yard force Lawn Mower cuts unevenly: * The blade may be damaged. Sharpen or replace the blade. * The blade may be assembled incorrectly. Re-assemble the blade correctly.
  • J
    Justin ThomasSep 2, 2025
    Why is Yard force LM G37A Lawn Mower vibrating at higher speed?
    • C
      crosbytravisSep 2, 2025
      If your Yard force Lawn Mower is vibrating at a higher speed, it could be because the cutting blade is unbalanced (balance the blade by grinding each cutting edge until they are equal) or the blade is loosened or incorrectly fitted (tighten the blade bolt).
  • M
    Michael AguirreSep 5, 2025
    What to do if grass bag is not filled sufficiently on Yard force Lawn Mower?
    • N
      Nancy HillSep 5, 2025
      If the grass bag on your Yard force Lawn Mower isn't filling sufficiently, it could be due to the cutting height being too low (adjust and increase the cutting height), the lawn or grass being wet (allow the lawn to dry), the underside of the mower deck being clogged (clean the underside of the mower deck), or the cutting blade being worn or damaged (replace the blade by contacting the customer service center).
  • A
    Aaron RodgersSep 9, 2025
    How to fix uneven cuts with Yard force LM G37A Lawn Mower?
    • T
      tina87Sep 9, 2025
      If your Yard force Lawn Mower cuts unevenly, the blade might be damaged (sharpen or replace the blade) or the blade might be assembled incorrectly (reassemble the blade correctly).
  • B
    bsmithSep 12, 2025
    Why does my Yard force LM G37A stop working or lose power?
    • T
      Todd FergusonSep 12, 2025
      If your Yard force Lawn Mower stops working or loses power, it could be due to: * Incorrect cutting height. Adjust the cutting height. * A worn or damaged cutting blade. Replace it with a new blade from a dealer service center. * Decreasing battery performance. Check the battery performance and charge it if necessary.

Summary

Intended Use

General Safety Warnings

Critical warnings and instructions for safe operation of the machine.

Product Safety Warnings

Specific safety guidelines for operating the lawnmower and charger.

Product Safety Warnings

General Operation

Charger Safety

Battery Pack Safety

Maintenance and Storage

Technical Specifications

Installation Guide

Lower Handle Assembly

Handle Attachment

Top Handle Mounting

Grass Bag Attachment

Operation Guide

Battery Charging Procedure

Detailed steps for charging the battery pack using the provided charger.

Switch ON;OFF

Instructions for turning the hedge trimmer on and off.

Power Indicator Usage

Telescopic Handle Adjustment

Battery Longevity Tips

Swivel Head Function

Cutting Height Adjustment

Battery Pack Management

Using the Hedge Trimmer

Starting and Stopping

How to start and stop the lawnmower motor.

Slope Operation Safety

Overload Protection

Grass Bag Emptying

Maintenance and Storage

Product Cleaning

Blade Removal and Installation

Battery Maintenance

Troubleshooting Guide

Mower Start Failures

Possible reasons and remedies for the mower not starting.

Power Loss Issues

Causes and solutions for the mower stopping or losing power.

Vibration Problems

Causes and remedies for excessive vibration.

Uneven Cutting Fixes

Reasons for uneven cutting and how to fix them.

20 V Cordless Pole Hedge Trimmer

Intended Use

Safety Information

General Power Tool Safety

Essential safety instructions applicable to all power tools.

Battery & Charger Safety

Specific safety precautions for batteries and chargers.

Hedge Trimmer Specific Safety

Safety guidelines unique to the operation of the hedge trimmer.

Assembly Guide

Battery Pack Insertion

Procedure for installing the battery pack into the tool.

Front Handle Assembly

Battery Charging

Steps for charging the battery pack before use.

Maintenance and Storing

Blade Lubrication

Cleaning Procedures

Troubleshooting

Trimmer Not Operating

Steps to take if the trimmer fails to start or operate.

Battery Not Charging

Troubleshooting steps if the battery pack is not charging.

Cutting Performance Issues

Causes and solutions for improper cutting performance.

Yard force LM G37A Specifications

General IconGeneral
TypePush lawn mower
Cutting width370 mm
Grass catcherYes
Product colorBlack, Orange
Maximum lawn area- m²
Mulching function-
Rear wheels diameter250 mm
Maximum cutting height75 mm
Minimum cutting height25 mm
Grass collecting volume45 L
Number of height positions7
Power sourceBattery
Weight and Dimensions IconWeight and Dimensions
Depth440 mm
Width760 mm
Height400 mm
Weight14500 g

Related product manuals