20 21
OPERATION
Fig. 10
OPERATION
Function of swivel head
Note: The cutter head can be locked in 9 positions (-45°~90°). Hold the handle (D) tightly.
Push the lock button (E) and then turn the cutter head (F) to the desired position. Release
the lock button (E) again and check whether the cutter head is locked in place.
Fig. 11
Using the hedge trimmer
WARNING! Remove the cut branches. DO NOT exceed the cutting capacity of this
product.
With its unique design the pole trimmer can be used to trim and shape hard to reach areas
of hedges and bushes such as those show in below Abb.ure.
E
D
F
45
o
C
-90
o
C
Cutting guide
Seasonal hedges and shrubs that lose their leaves in the winter should be trimmed in June
and October. Evergreen hedges and shrubs that retain their leaves in the winter should be
trimmed in April and August. Conifers and other fast growing shrubs can be trimmed every
six weeks from May onwards, throughout the growing season.
To Next Page
Loading...
Need help?
General
