2 3
ProRider E559
Original Instructions
CONTENT
Safety symbols
The purpose of safety symbols is to attract your attention to any possible dangers.
The safety symbols and their explanations deserve your careful attention and full
understanding. The symbol warnings do not, by themselves, eliminate any danger.
The instructions and warnings they give are no substitute for proper accident
prevention measures.
WARNING:
Be sure to read and understand all safety instructions
within this operator’s manual, including all safety alert symbols such as
“DANGER”
,
“WARNING”
, and
“CAUTION”
before using this tool. Failure
to follow all instructions listed below may result in electric shock, re and/or
serious personal injury.
SAFETY ALERT SYMBOLS:
Indicate
DANGER, WARNING,
or
CAUTION.
Maybe
used in conjunction with other symbols or pictographs.
Symbol meanings
This page depicts and describes safety symbols that may appear on this product.
Read, fully understand and follow all instructions on the machine before attempting
to assemble and operate.
To reduce the risk of injury, user must read instruction manual carefully.
Wet Conditions Alert. Do not expose to rain or use in damp locations.
Failure to use in dry conditions and to observe safe practices can result
in electric shock.
Keep hands and feet away from blade and cutting area.
Do not reach hands or feet under mower deck.
Do not operate on steep slopes or inclines greater than 12º. Mow up and
down the face of slopes, never across.
Keep all children, bystanders, and animals at least 30 m away.
SYMBOLS
Symbols 03
General safety warnings 07
Product safety warnings 11
Description of product 15
Technical data 18
Installation 20
Operation 25
Maintenance and storage 33
Troubleshooting 40
Declaration of conformity 42
To Next Page
Loading...
