10
Lever on handle which allows the engine to run. When lever is
released, engine will stop.
Restricts the air intake. This allows for an enriched fuel-air
mixture which helps to start the engine.
Location of engine exhaust.
The engine is equipped with an easy pull recoil
starter.
Rotating cutting element.
Prevents stones and debris from being thrown at the operator.
Provides spark to ignite air/ fuel mixture. The
Spark Plug Wire must be disconnected and moved away from the Spark Plug
when servicing the unit.
Removes debris and contaminates from intake air, allowing engine
to run smoothly with low exhaust.
Used to control the edging depth of cut.
Must be connected for the Start Lever to function.
To Next Page
Loading...
Need help?
General
