Yardistry YM12810 - Steps 12-14: Roof Peak and Final Panels

32 support@yardistrystructures.com
Peak
Cap
Carriage Bolt
Peak
Loop
Spring Clip
1/4” Nut
A: Insert Carriage Bolt through the top of Peak Cap, into Peak Post then Spring Clip. The Spring Clip holds the
assembly together. (g. 12.1)
B: Insert 1/4” Nut into Peak Loop. Be careful nut is loose and will fall out until attached to Peak Cap Assembly.
(g. 12.2)
Fig. 12.1
Peak
Post
Componets:
1 x Roof Peak Set
1 x Carriage Bolt
1 x Peak Loop
1 x Spring Clip
1 x 1/4”Nut
1 x Peak Cap
1 x Peak Post
Step 12: Roof Peak Assembly
Fig. 12.2