EasyManuals Logo

Yardistry YM12810X User Manual

Yardistry YM12810X
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4 support@yardistrystructures.com
Instructions for Proper Maintenance
Your Yardistry structure is designed and constructed of quality materials. As with all outdoor
products it will weather and wear. To maximize the enjoyment, safety and life of your structure
it is important that you, the owner, properly maintain it.
Symbols:
Throughout these instructions symbols are provided in the top, right-hand corner of the page.
If you dispose of your Yardistry structure: Please disassemble and dispose of your
unit so that it does not create any unreasonable hazards at the time it is discarded. Be
sure to follow your local waste ordinances.
HARDWARE:
Check metal parts for rust. If found, sand and repaint using a non-lead paint complying
with 16 CFR 1303.
Inspect and tighten all hardware after completion of assembly; after rst month of use; and
then annually. Do not over-tighten as to cause crushing and splintering of wood.
Check for sharp edges or protruding screw threads, add washers if required.
WOOD PARTS:
Applying a water repellent or stain (water-based) on a yearly basis is important
maintenance to maintain maximum life and performance of the product.
Check all wood members for deterioration, structural damage and splintering. Sand down
splinters and replace deteriorated wood members. As with all wood, some checking and
small cracks in grain is normal
Some gapping may occur at some wood connections.
Tape Measure
Carpenters Level
Standard or Cordless Drill
#2 Phillips Bit or Screwdriver
7/16” & 9/16” Wrench
Assembly Guides
8' Step Ladder
Safety Glasses
Adult Helper
Safety Gloves
Hard Hat
Tools Required:
Use Help, where this is shown, 2, 3 or 4
people are required to safely complete
this step. To avoid injury or damage to the
assembly make sure to get some help.
Use a measuring tape to assure proper
location
Pre-drill a pilot hole before fastening
screw or lag to prevent splitting of wood.
6’ Step Ladder x 2
Square
Ratchet
7/16, 1/2 & 9/16 Socket

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yardistry YM12810X and is the answer not in the manual?

Yardistry YM12810X Specifications

General IconGeneral
BrandYardistry
ModelYM12810X
CategoryOutdoor Furnishing
LanguageEnglish

Related product manuals