104 support@yardistrystructures.com
Step 28: Install Vent Mesh
A: From inside the Greenhouse place Vent Mesh against (1170) Vent Roof Panel. Based on location of Female
Snaps determine where Male Snaps should be located then install Male Snaps. (F28.1, F28.2 and F28.3)
B: Slide Single Spring Window Opener through hole in Vent Mesh then attach mesh to Male Snaps. (F28.1 and
F28.4)
F28.2
F28.1
Hardware
24 x Male Snap with Screw
Components
1 x Vent Mesh
Male Snap
with Screw
x 24
Single Spring
Window
Opener
F28.3
F28.4
Vent
Mesh
(1114)
Middle Roof
Rafter
(1124) Vent
Roof Peak
(1114) Middle
Roof Rafter
Vent
Mesh
(1128) Bottom
Vent Block
(1114) Middle
Roof Rafter
Female
Snap
To Next Page