103 support@yardistrystructures.com
Step 27: Attach ID Plaque
A: Attach Gazebo ID Plaque to a prominent location on your greenhouse, such as inside the greenhouse above
the door, with two #10 x 1-1/4” Pan Screws. This provides warnings concerning safety and important contact
information. A tracking number is provided to allow you to get critical information or order replacement parts for
Hardware
2 x #10 x 1-1/4” Pan Screw
#10 x 1-1/4”
Pan Screw
Gazebo ID
Plaque
Components:
1 x Gazebo ID Plaque
F27.2
F27.1
(1143) Front
Gable Beam
To Next Page
Loading...