75 support@yardistrystructures.com
Step 34: Metal Hooks and Plaque
A: Two 50 mm Hooks are included with this unit for attaching wiring. They can be placed anywhere along the
Rafters as needed. Pre-drill with a 1/8” drill bit before installing. (F34.1 and F34.2)
B: Attach Gazebo ID Plaque to a prominent location on your gazebo with two #8 x 1” Pan Screws. This provides
warnings concerning safety and important contact information. A tracking number is provided to allow you to get
critical information or order replacement parts for this specic model. (F34.1 and F34.3)
Hardware
2 x 50 mm Hooks
2 x #8 x 1” Pan Screw
1 x Gazebo ID Plaque
F34.1
F34.2
50 mm Hook
F34.3
Note: We have provided two
50 mm hooks for optional use
to hold in place any wires if
required. These hooks are
not designed to hold any
heavy products such as
lights, ower pots, etc.
#8 x 1” Pan
Screw
Gazebo ID
Plaque
To Previous Page
Loading...
