model no. 060-2279-2 | contact us: 1.866.523.5218 model no. 060-2279-2 | contact us: 1.866.523.5218
7
GUIDELINES FOR USING EXTENSION CORDS
• USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy enough to carry the current your
product will draw. An undersized cord will cause overheating. The table below shows the
correct size to use depending on cord length and nameplate ampere rating. If in doubt, use
the next heavier gauge. The smaller the gauge number, the heavier the cord.
Minimum Gauge for Extension Cords (AWG)
(when using 120 V only)
Ampere Rating Total Length of Cord in Feet (meters)
More Than Not More Than 25' (7.6 m) 50' (15 m) 100' (30.4 m) 150' (45.7 m)
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
• Make sure your extension cord is properly wired and in good electrical condition. Always
replace a damaged extension cord or have it repaired by a qualified person before use.
Keep extension cords away from sharp objects, excessive heat and damp or wet areas.
• Use a separate electrical circuit for your tools. This circuit should comprise a wire of at least
12 gauge and should be protected with a 15 A time-delayed fuse. Before connecting the
motor to the power line, make sure the switch is in the OFF position and the electric current
is identical to that stamped on the motor nameplate. Running at a lower voltage will damage
the motor.
!
CAUTION: Always make sure that your outlet is properly
grounded. If you are uncertain, have it checked by a certified
electrician.
!
WARNING: This grass trimmer is for outdoor use only. Do
not expose to rain or use in damp locations.
!
WARNING: Although this device is double-insulated, the
extension cord and receptacle must still be grounded
while in use to protect the operator from electric shock.
Electrical Information
To Next Page
Loading...
Need help?
General