Yardworks 100666 User Manual

model no. 060-1314-4 | contact us: 1.866.523.5218 model no. 060-1314-4 | contact us: 1.866.523.5218
23
OPERATION
 WARNING: Never start the engine until all the above measures under
assembly have been carried out.
– Never use the snowblower without first reading and understanding
the instructions and all the warning and instruction stickers on the
machine.
– Always use protective goggles or a visor during use, maintenance
and service.
 NOTICE: The engine can be seriously damaged without oil. Always
check the oil level before using. The machine must stand on level ground
when checking.
Engine key may be attached to the recoil starter grip. Please remove the
key from the recoil starter grip and attach/install properly.
BEFORE OPERATION
CHECK THE GENERAL CONDITION:
– Look around and underneath the engine for signs of oil or gasoline leaks.
– Remove any excessive dirt or debris, especially around the muffler and recoil starter.
– Look for signs of damage.
– Check that all shields and covers are in place, and all nuts, bolts, and screws are
tightened.
CHECK THE ENGINE:
1. There is no fuel or oil in the engine. Fill with fuel and add 0W-30 prior to first use.
2. Check the fuel level (see ADD FUEL section).
3. Check the oil level (see CHECK/ADD OIL section).

Yardworks 100666 Specifications

General

Clearing Width	24 inches
Engine Displacement	208 cc
Throw Distance	Up to 40 feet
Starter Type	Electric Start
Drive System	Self-propelled
Number of Forward Speeds	6
Number of Reverse Speeds	2
Chute Control	Manual
Wheel Size	13 inches
Engine Type	Gas
Intake Height	20 inches
Type	Two-stage