Yardworks 14 A - Cleaning and Storage

model number 054-5764-4 | contact us: 1.866.523.5218
31
CLEANING/STORAGE
• Clean the moulded plastic housing of the chainsaw using a soft brush and clean cloth. Do
not use water, solvents or polishes. Remove all debris, especially
from the motor cooling vents.
• Remove and brush clean the cover plate, chain and chain bar after 1 to 3 hours of use.
Clean the area under the cover plate, the drive sprocket and chain bar assembly using a
soft brush. Clean oil outlet with a clean cloth.
• If the chainsaw is to be stored for a longer period of time, clean chain and chain bar.
• Store in a secure, dry place out of the reach of children.
 %POPUQMBDFPUIFSPCKFDUTPOUIFDIBJOTBX
 5PQSFWFOUMFBLBHFFOTVSFNBDIJOFJTMFGUJOBIPSJ[POUBMQPTJUJPOPJMªMMFSDBQ
uppermost).
• When storing machine in original packaging the oil tank must be completely emptied.
Injecting grease to lubricate
W
Assembly