Yardworks 14 A User Manual

model number 054-5764-4 | contact us: 1.866.523.5218
32
TROUBLESHOOTING TABLE
SYMPTOM POSSIBLE CAUSE REMEDY
Chainsaw fails to operate
Kickback brake is activated
No power
Mains socket faulty
Extension cord damaged
Fuse faulty
Pull hand guard back in
position 1 (Figure H)
Check power
Use another socket
Check cord; replace
Replace fuse
Chainsaw operates
intermittently
Extension cord damaged
Loose connection
Internal wiring defective
On/Off switch defective
Check cord; replace
Contact service agent
Contact service agent
Contact service agent
Dry chain
No oil in reservoir
7FOUJOPJMªMMFSDBQDMPHHFE
Oil passage clogged
3FªMMPJM
Clean cap
Clean oil passage outlet
Kickback brake/run down
brake
Brake does not stop chain Contact service agent
Chain/chain bar
overheats
No oil in reservoir
7FOUJOPJMªMMFSDBQDMPHHFE
Oil passage clogged
Chain is over tensioned
Dull chain
3FªMMPJM
Clean cap
Clean oil passage outlet
"EKVTUMPDLJOHLOPC
Sharpen chain or replace
Chainsaw rips, vibrates,
does not saw properly
Chain tension too loose
Dull chain
Chain worn out
Chain teeth are facing in the
wrong direction
"EKVTUMPDLJOHLOPC
Sharpen chain or replace
Replace chain
Reassemble with chain in
correct direction
Never use tools with defective On/Off switches or defective kickback brake (hand guard).
In the case of all other types of technical faults, please contact helpline or local service
centre.
Troubleshooting

Yardworks 14 A Specifications

General

Brand	Yardworks
Model	14 A
Category	Chainsaw
Language	English