both hands.
of your right hand, then squeeze the trigger
to squeeze the trigger for continued operation.
a. Move the chain saw away from cutting area, and
then release the trigger switch to stop the chain
saw.
a. Cut only wood or materials made from wood; do
not cut sheet metal, plastics, masonry, or non-
wood building materials.
b. Never allow children to operate the chain saw.
c. Allow no person to use this chain saw who has
not read this Operator’s Manual or received ade-
quate instructions for the safe and proper use of
this chain saw.
d. When felling a tree, keep everyone - helpers,
bystanders, children, and animals - a safe
distance from the cutting area. During felling
operations, the safe distance should be a least
twice the height of the largest trees in the felling
area. During bucking operations, keep a mini-
mum distance of 15 feet (4.5 m) between work-
ers. Trees should not be felled in a manner that
would endanger any person, strike any utility line
or cause any property damage. If a tree does
make contact with any utility line, stay clear of
the tree and the line and notify the utility company
immediately.
e. Always cut with both feet on solid ground to
f. Do not cut above chest height, as a saw held
g. Do not fell trees near electrical wires or buildings.
h. Cut only when visibility and light are adequate for
you to see clearly.
a. Wear heavy duty non-slip gloves for maximum
grip and protection.
c. Always grasp the front handle with the left hand
and the rear handle with the right hand.
thumb wrapped under the front handle.
To Next Page
