10 YASKAWA ELECTRIC TOBP C730600 49A V1000 Option MECHATROLINK-II Installation Manual
2 Product Overview
2 Product Overview
◆ About This Product
MECHATROLINK-II Option (Model: SI-T3/V) is designed for connecting a drive to a field
network using the MECHATROLINK protocol.
By installing the MECHATROLINK-II Option to a drive, it is possible to do the following
from a MECHATROLINK master device:
• operate the drive
• monitor the operation status of the drive
• change parameter settings.
◆ Applicable Model
The MECHATROLINK-II Option can be used with the drive models in Tabl e 1.
Table 1 Applicable Model
Drive Software Version <1>
<1> See “PRG” on the drive nameplate for the software version number.
V1000 ≥ 1016
To Next Page
Loading...