YASKAWA MECHATROLINK-II V1000 - Page 13

4 MECHATROLINK-II Option Components
YASKAWA ELECTRIC TOBP C730600 49A V1000 Option MECHATROLINK-II Installation Manual 13
◆ Dimensions
The installed MECHATROLINK-II Option adds 27 mm to the total depth of the drive.
Figure 2
Figure 2 Dimensions
◆ Connector
Table 3 Connector Descriptions
Connector Pin No. Signal Name I/O Function
CN3
A1 (NC) – Not used.
A2 SRD– I/O Send/receive data (–)
A3 SRD+ I/O Send/receive data (+)
A4 (NC) – Not used.
Shell SLD – Shield
B1 (NC) – Not used.
B2 SRD– I/O Send/receive data (–)
B3 SRD+ I/O Send/receive data (+)
B4 (NC) – Not used.
Shell SLD – Shield
27 mm