YASKAWA MP2200 Series - Page 16

E-14
 Intended Option Output Modules
The intended option output modules are listed below.
• JAPMC-IO2300 (-E) (LIO-01)
• JAPMC-IO2301 (-E) (LIO-02)
• JAPMC-IO2303 (-E) (LIO-04)
• JAPMC-IO2304 (-E) (LIO-05)
• JAPMC-IO2305-E (LIO-06)
• JAPMC-AN2310-E (AO-01)
• JAPMC-PL2300-E (CNTR-01)
• JAPMC-PL2310-E (PO-01)
• JAPMC-DO2300 (-E) (DO-01)
• JAPMC-MC2300 (-E) (SVA-01)
•
JAPMC-MC23
10 (-E) (SVB-01)
• JAPMC-MC2320-E (SVC-01)
• JAPMC-CP2700-E (MPU-01)
• JEPMC-MP2300 (-E) (MP2300 basic module)
• JEPMC-IO2310 (-E) (MECHATROLINK-II 64 points I/O module, sink mode output)
• JEPMC-IO2330 (-E) (MECHATROLINK-II 64 points I/O module, source mode output)
• JEPMC-AN2910 (-E) (MECHATROLINK-II analog output module)
• JAMSC-IO2910-E (16 outputs output module, sink mode output)
• JAMSC-IO2920-E (8 inputs, 8 outputs I/O module, sink mode output)
• JAMSC-IO2950-E (8 relay outputs, relay output module)
• JEPMC-MTD2310-E (MECHATROLINK-III 64 points I/O module, sink mode output)
• JEPMC-MTA2900-E (MECHATROLINK-III analog input module)
• JEPMC-MTA2910-E (MECHATROLINK-III analog output module)
• JEPMC-MTP2900-E (MECHATROLINK-III pulse input module)
• JEPMC-MTP2910-E (MECHATROLINK-III pulse output module)