YASKAWA MP2200 Series User Manual

1 Introduction
E-1
1 Introduction
This safety precautions manual describes the MP2200/MP23/MP2400 Machine Control-
ler. To properly use the MP2200/MP23/MP2400 Machine Controller, read this safety
precautions manual and user’s manual (see the table below) thoroughly, and retain for easy ref-
erence for inspections and maintenance etc. Make sure that these manuals reach the end user.
2 Related Manuals
Refer to the following related manual as required.
3 General Precautions
The following describes general precautions. Note the following to ensure safe application.
• The drawings presented in this manual are sometimes shown without covers or protec-
tive guards. Always replace the cover or protective guard as specified first, and then
operate the products in accordance with the manual.
• The drawings presented in this manual are typical examples and may not match the
product you received.
• This manual is subject to change due to product improvement, specific modification, and
manual improvement. When this manual is revised, the manual code is updated and the
new manual is published as a next edition. The edition number appears on the front and
back covers.
• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa rep-
resentative or one of the offices listed on the back of this manual.
• Yaskawa will not take responsibility for the results of unauthorized modifications of this
product. Yaskawa shall not be liable for any damages or troubles resulting from unau-
thorized modification.
Manual Name Manual Number
Machine Controller MP2300S
Basic Module User’s Manual
SIEP C880732 00
Machine Controller MP2400
User’s Manual
SIEP C880742 00
Machine Controller MP2300
Basic Module User’s Manual
SIEP C880700 03
Machine Controller MP2000 Series
Communication Module User’s Manual
SIEP C880700 04
Machine Controller MP900/MP2000 Series
MECHATROLINK System User’s Manual
SIE-C887-5.1
Machine Controller MP2200
User’s Manual
SIEP C880700 14
Machine Controller MP2200/MP2300
Motion Module User’s Manual
SIEP C880700 16
Machine Controller MP2310
Basic Module User’s Manual
SIEP C880732 01

YASKAWA MP2200 Series Specifications

General

Brand	YASKAWA
Model	MP2200 Series
Category	Controller
Language	English