YASKAWA Varispeed G7 - 7 MECHATROLINK-II Commands; Main Commands

7 MECHATROLINK-II Commands
23
7 MECHATROLINK-II Commands
7.1 Main Commands
The format of the main commands are as follows.
 No Operation (NOP)
Only the ALARM and STATUS fields of the response data can be monitored.
This command can be used in all phases.
Byte Command Response
1 NOP NOP
2 ALARM
3 STATUS
4
5
6
7
8
9
10
11
12
13
14
15
16 WDT RWDT