Need help?Do you have a question about the YASKAWA VS MINI J7 and is the answer not in the manual?
General| Series | VS mini J7 |
|---|---|
| Output Frequency | 0-400 Hz |
| Cooling Method | Fan Cooled |
| Enclosure Rating | IP20 |
| Control Method | V/f Control |
| Overload Capacity | 150% for 60 seconds |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit |
| Communication | Modbus RTU |
| Operating Temperature | -10°C to +40°C |
| Storage Temperature | -20°C to +60°C |
| Humidity | 95% RH or less (non-condensing) |
| Altitude | Up to 1000m without derating |
| Dimensions | Varies by model |
| Weight | Varies by model |
General safety and handling guidelines for the manual.
Verify part numbers and unit condition upon receipt.
Diagrams and labels for identifying inverter unit components.
Detailed technical data for 200V class inverters.
Detailed technical data for 400V class inverters.
Physical dimensions and mounting specifications for inverter units.
Guidelines for selecting a suitable installation environment.
General guidelines for connecting power and control wiring.
Specifications for wire types and terminal screw sizes.
Procedures for connecting the main power circuit to the inverter.
Steps for initial testing and operation of the inverter.
Guide to using the digital operator for inverter functions.
Explains the meaning of different LED indicator states.
Guide to setting up and initializing inverter parameters.
Configuring V/f control patterns for motor operation.
How to switch between local and remote operation modes.
Methods for selecting run and stop command sources.
Recommended checks for maintaining inverter performance and reliability.
Guidelines and schedule for replacing inverter components.
Explanations of alarm codes, causes, and corrective actions.
Information regarding compliance with LVD standards.
Information regarding compliance with EMC standards.
Overview of safety considerations for inverter installation and operation.
Specifies the intended applications and operational requirements.
To Next Page
