YASKAWA VS MINI J7 - Page 27

27
24 0118H Frequency reference 4
Setting unit: 0.1Hz (less than 100Hz) /
1Hz (100Hz or greater)
Setting range: 0.0 ~ 400Hz
0.0Hz 65
25 0119H Frequency reference 5
Setting unit: 0.1Hz (less than 100Hz) /
1Hz (100Hz or greater)
Setting range: 0.0 ~ 400Hz
0.0Hz 65
26 011AH Frequency reference 6
Setting unit: 0.1Hz (less than 100Hz) /
1Hz (100Hz or greater)
Setting range: 0.0 ~ 400Hz
0.0Hz 65
27 011BH Frequency reference 7
Setting unit: 0.1Hz (less than 100Hz) /
1Hz (100Hz or greater)
Setting range: 0.0 ~ 400Hz
0.0Hz 65
28 011CH Frequency reference 8
Setting unit: 0.1Hz (less than 100Hz) /
1Hz (100Hz or greater)
Setting range: 0.0 ~ 400Hz
0.0Hz 65
29 011DH Jog frequency reference
Setting unit: 0.1Hz (less than 100Hz) /
1Hz (100Hz or greater)
Setting range: 0.0 ~ 400Hz
6.00Hz 66
30 011EH
Frequency reference
upper limit
Setting unit: 1%
Setting range: 0 ~ 110%
100% 69
31 011FH
Frequency reference
lower limit
Setting unit: 1%
Setting range: 0 ~ 110%
0% 69
32 0120H Motor rated current
Setting unit: 0.1A
Setting range: 0 ~ 120% of inverter
rated output current
Note: if set to 0%, then electronic ther-
mal motor overload is disabled.
(Note 2) 94
33 0121H
Electronic thermal motor
protection
0: Standard motor application
1: Specialized motor application
2: No electronic motor overload protec-
tion
094
No.
Register
No. for
Trans-
mission
Name Description
Initial
Setting
*User
Setting
Ref.
Page