131
SUSPENSION
Front Suspension Inspection
With a well functioning front and rear suspension you are able to ride your Mini-Motorbike safely and with
stability. When visual inspection indicates that some suspension parts may be worn or damaged, contact
your nearest YCF dealer to check your Mini-Motorbike for replacement parts if necessary.
(A) Mounting bolts
(B) Mounting bolts
Front Suspension Adjustments
1. To check the fork, pull the front brake lever in
and hold it there. Press downwards on the
handlebar and let it go upwards. The whole set
of movements should be very smooth and show
a swift rebound.
2. When visual inspection indicates that some bolts
or nuts may be rusted or damaged, contact your
nearest YCF dealer to check your Mini-
Motorbike for replacement parts if necessary.
For model SP3-F150, SP3-F190, BIGY 190 MX, equipped with “ENGI” fork, there are 2 possible regulations, at the
top, the relaxation or "the bounce"(recovery") and below the regulation in compression. For these 2 regulations, it is
enough to squeeze(tighten) the screws of the tube of fork clockwise those from above ( A ) to harden the relaxation and
those from below ( B ) to harden the compression.
To Next Page
Loading...
