1
Packaging Contents
The following items are included in your package. If you nd anything missing, contact your system administrator.
Ethernet Cable Mobile Device Cable
(3.5mm Jack)
IP Conference Phone Power Adapter Quick Start Guide
Assembling the Phone
1. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you which one to use.
A
B
AC Power Option PoE ( Power over
Ethernet ) Option
Power Adapter
(DC 5V)
Note:
The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party power adapter may
cause the damage to the phone.
If inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch is PoE-compliant.
2. Connect the optional USB ash drive, as shown below:
USB
Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party
accessories may result in reduced performance.
E
N
G
L
I
S
H
To Next Page
Loading...
