| Call Features | 18
Performing a Semi-Attended/Attended Transfer
You can transfer a call to another contact immediately when receiving ringback or after consulting with her/him first.
1.
2.
Enter the number you want to transfer to and dial out.
3.
4.
Do one of the following:
• When you hear the ringback tone, press the Transfer soft key to finish a semi-attended transfer.
• After the contact answers the call, press the Transfer soft key to finish an attended transfer.
Conference Calls
The phone supports creating local conference , a seven-way hybrid UC meeting and network conference.
During the conference, follow these tips:
• Mute your microphone when you are not speaking, especially in noisy environments.
• Avoid tapping or rustling papers near the microphone.
• Speak in your normal voice without shouting.
Local Conference
You can initiate a five-way (including yourself) conference calls with your contacts on the phone.
Setting Up a Local Conference Call
You can set up a local conference call with up to two contacts.
1.
Place a call to the first party.
2.
When the first party answers the call, select Conference.
The active call is placed on hold.
3.
Dial the second party’s number.
4.
When the second party answers the call, select Conf. to invite two parties to join the conference.
Inviting an Incoming Call to a Conference
You can create a conference when the phone receives an incoming call during the call(s) or a conference.
Tap Join when the phone receives a new call.
The conference among the original call(s) and the incoming call is set up. If you are in a conference, the new party
will join the conference.
Holding or Resuming a Conference Call
When you place a conference call on hold, other participants cannot hear each other until you resume the held
conference call.
1.
Tap Hold to place the conference on hold.
2.
Tap Resume to resume the held conference call.
Muting/Unmuting a Conference Call
When you mute the local microphone during a conference call, other participants can hear each other except you.
1.
Press the MUTE touch key to mute the conference.
2.
Press the MUTE touch key again to unmute the conference.
Splitting a Conference Call
You can split the conference call into individual calls. After the split, the conference call ends, and other parties are
held.
To Next Page
Loading...
Need help?
General
