Yealink CTP18 - CTP18 Connection; Method 1. Connect the CTP18 with endpoint directly; Method 2. Connect the CTP18 with the endpoint by Wired LAN

2
Reset
MAC
SN
7.5m
2m
Method 2. Connect the CTP18 with the endpoint by Wired LAN
(It is only applicable to VCS/MeetingEye endpoints/MeetingBar endpoints)
Connect the CTP18 to PoE Adapter
Method 1. Connect the CTP18 with endpoint directly
(It is only applicable to VCS endpoints and MeetingEye endpoints)
Connect your CTP18 with the endpoint
Reset
MAC
SN
VC200
PoE
B
or
Video Conferencing Endpoint （except VC200)
A
After connecting CTP18 to the endpoint, you can control the endpoint on CTP18.
1