Yealink MTouch Plus - Hardware Interface Instructions; Interface Ports Explained; Reset Function and Port Usage

2
Hardware Interface Instructions
   




USB-A Port: Connect to a USB audio device
.
Ext Touch: Reserved for dual touch panels
control function.
Reset: Reset the MTouch Plus to factory defaults.
USB-C Port: Connect the PC for content sharing.
3.5mm Headset Port: Connect to a headset.
PD Port (USB-C) :Connect the PD power supply
(additional purchase) to power the PC.
MCore: Connect to the Mini-PC.
USB-A Port: Connect to the WPP30 for pairing.
1
2
3
4
5
6
7
8
EN