What to do if there is no content displayed on the second display with Yealink MVC400 Conference System?
If you are not seeing content on the second display, first make sure that both displays are securely connected to the HDMI ports on the back of the MCore/Mini-PC. Also, verify that the Dual Monitor mode is enabled. If the issue persists, try restarting the device; after restarting, it will automatically launch the Teams Room Systems app.
Why I cannot control the camera on my Yealink Conference System?
If you cannot control the camera of your Yealink Conference System, it might be because the tracking mode is enabled. To regain manual control, enable the manual control mode. Refer to 'Enabling Manual Control Mode' for instructions.
How to fix the issue when the System Camera of Yealink MVC300/MVC300 is not available?
If the system camera of your Yealink MVC300/MVC300 is not available, check whether you have set the UVC30 camera as the content camera.
Why is the room not enabled for Teams meetings on my Yealink MVC400 Conference System?
To use Teams meetings on your Yealink Conference System, you must first enable Teams meeting mode on your system.
General| Bluetooth | Yes |
|---|---|
| Product type | Group video conferencing system |
| Product color | Black, Grey |
| Number of cameras | 1 |
| Number of persons | - person(s) |
| Megapixel | 20 MP |
| Camera type | Single camera |
| Sensor type | - |
| Digital zoom | 8 x |
| Image sensor size | - \ |
| Field of view (FOV) angle | 133 ° |
| Maximum frame rate | 30 fps |
| Internal memory | 8000 MB |
| Storage media type | SSD |
| Total storage capacity | 128 GB |
| USB connector type | USB Type-A, USB Type-B |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| HDMI output ports quantity | 2 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 4 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Display diagonal | 8 \ |
| Touchscreen type | Capacitive |
| Display resolution | 1280 x 800 pixels |
| Processor family | Intel® Core™ i5 |
| Computer system type | Mini PC |
| Operating system installed | Windows 10 IoT Enterprise |
| Number of microphone arrays | 8 |
| Cables included | USB |
Weight and Dimensions| Weight | 6400 g |
|---|---|
| Camera weight | 2560 g |
| Interface module weight | 1000 g |
| Camera dimensions (WxDxH) | 600 x 68 x 82 mm |
| Interface module dimensions (W x D x H) | 202 x 151 x 100 mm |
Lists all components included with the UVC40 camera.
Lists all components included with the MCore Mini-PC.
Illustrates the physical connections between MVC400 components.
Lists all components included with the MTouch II touch console.
Step-by-step guide for sharing content wirelessly via WPP20.
Steps to select the correct audio input and output devices.
Instructions to access and operate camera controls on the UVC40.
Important information regarding camera control limitations when tracking mode is active.
Official statement of compliance for the MCore product.
Official statement of compliance for the UVC40 product.
Official statement of compliance for the MTouch II product.
Covers operating, environmental, and general safety requirements.
Addresses common issues and regulatory statements like FCC and IC.
Provides contact details, company overview, and technical support channels.
To Next Page
