To Next PageTo Next PageWhat to do if there is no content displayed on the second display with Yealink Conference System?
If you are not seeing content on the second display, first make sure that both displays are securely connected to the HDMI ports on the back of the MCore/Mini-PC. Also, verify that the Dual Monitor mode is enabled. If the issue persists, try restarting the device; after restarting, it will automatically launch the Teams Room Systems app.
Why I cannot control the camera on my Yealink MVC940 Conference System?
If you cannot control the camera of your Yealink Conference System, it might be because the tracking mode is enabled. To regain manual control, enable the manual control mode. Refer to 'Enabling Manual Control Mode' for instructions.
How to fix the issue when the System Camera of Yealink MVC300/MVC300 is not available?
If the system camera of your Yealink MVC300/MVC300 is not available, check whether you have set the UVC30 camera as the content camera.
Why is the room not enabled for Teams meetings on my Yealink MVC940?
To use Teams meetings on your Yealink Conference System, you must first enable Teams meeting mode on your system.
General| Reset slot | Yes |
|---|---|
| USB connector type | USB Type-A, USB Type-B |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 1 |
| HDMI output ports quantity | 3 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 4 |
| Display diagonal | 11.6 \ |
| Touchscreen type | Capacitive |
| Megapixel | - MP |
| Camera type | Single camera |
| Sensor type | CMOS |
| Optical zoom | 12 x |
| Image sensor size | - \ |
| Diagonal field of view | 80 ° |
| Vertical field of view | 45 ° |
| Horizontal field of view | 73 ° |
| Harmonized System (HS) code | 85176990 |
| Pan range | 0 - 200 ° |
| Product type | Group video conferencing system |
| Product color | Black |
| Tilt angle range | 0 - 130 ° |
| Bluetooth version | 5.2 |
| Number of cameras | 2 |
| Number of persons | - person(s) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax) |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Processor family | Intel® Core™ i5 |
| Computer system type | Mini PC |
| Operating system installed | Windows 10 IoT Enterprise |
| Internal memory | 8192 MB |
| Storage media type | SSD |
| Total storage capacity | 128 GB |
| Maximum video resolution | 3840 x 2160 pixels |
| Telepresence | - |
| Trusted Platform Module (TPM) version | 2.0 |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
| Interface module RJ-45 ports quantity | 7 |
Weight and Dimensions| Weight | 12100 g |
|---|---|
| Package depth | 413 mm |
| Package width | 935 mm |
| Package height | 312 mm |
| Package weight | 13800 g |
Describes wireless content sharing using the WPP30 device.
Explains how to adjust camera settings via the MTouch Plus interface.
Details the process of pairing the RoomSensor with the MTouch Plus.
Basic precautions for device installation, operation, and handling.
Guidelines for device placement and operating conditions.
Instructions on how to safely clean the device.
Guidance on eco-friendly disposal of the device.
