Yealink SIP-T2 Series - Page 29

Getting Started
19
The following figure shows a portion of a txt formatted English language file:
####################################################
## Configure the access URL of the LCD language file ##
####################################################
gui_lang.url =
If you want to modify the translation of an existing language, configure the parameter
“gui_lang.url =” in the configuration file, for example:
gui_lang.url = tftp://192.168.1.100/lang+English.txt.
During the auto provisioning process, the phone connects to the provisioning server
“192.168.1.100”, and downloads the language file “lang+English.txt”.
#Delete all custom languages.
gui_lang.delete = http://localhost/all
Yealink IP phones allow you to customize the logo displayed on the LCD screen. SIP-T20P
IP phones only support a text logo. These two IP phone models use the wallpaper
instead.
Available languages may vary between different firmware versions.
English language file name must be “lang+English.txt”.
To modify translation of an existing language, do not rename the language file.