User Guide for the SIP-T21P/SIP-T21 IP Phone
62
3. Enter the desired delay time in the Inter Digit Time (1~14s) field.
The default delay time is 4s.
4. Click Confirm to accept the change.
Note
You can dial a hotline number immediately upon lifting the handset, pressing the
Speakerphone key or pressing a line key. You can also configure a delay, where the
phone will dial out the hotline number automatically after the specified period of time.
To configure the hot line number via phone user interface:
1. Press Menu->Features->Hotline.
2. Enter the desired number in the Number field.
3. Enter the delay time (in seconds) in the Hotline Time-out field.
The valid values range from 0 to 10.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Hotline is configurable via web user interface at the path Features->General
Information.
To Next Page
Loading...
