Yealink SIP-T23G

Using Enhanced DSS Keys on Yealink IP Phones
15
Parameters
Permitted Values
Default
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
softkey.X.use.incoming_call
(X ranges from 1 to 10)
0 or 1
0
Description:
It enables or disables the custom soft key X to be displayed in the alerting (ringing)
state.
0-Disabled
1-Enabled
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
softkey.X.use.connecting
(X ranges from 1 to 10)
0 or 1
0
Description:
It enables or disables the custom soft key X to be displayed in the connecting state.
0-Disabled
1-Enabled
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
softkey.X.use.transfer_connecting
(X ranges from 1 to 10)
0 or 1
0
Description:
It enables or disables the custom soft key X to be displayed in the transfer connecting
state.
0-Disabled
1-Enabled
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
softkey.X.use.on_talk
(X ranges from 1 to 10)
0 or 1
0
Description:
It enables or disables the custom soft key to be displayed in the on talk state.
0-Disabled