Yealink SIP-T23G

Using Enhanced DSS Keys on Yealink IP Phones
17
Parameters
Permitted Values
Default
1-Enabled
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
softkey.X.use.held
(X ranges from 1 to 10)
0 or 1
0
Description:
It enables or disables the custom soft key X to be displayed in the held state.
0-Disabled
1-Enabled
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
softkey.X.use.conferenced
(X ranges from 1 to 10)
0 or 1
0
Description:
It enables or disables the custom soft key to be displayed in the conference state.
0-Disabled
1-Enabled
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
softkey.X.use.dialtone
(X ranges from 1 to 10)
0 or 1
0
Description:
It enables or disables the custom soft key X to be displayed in the dial tone state.
0-Disabled
1-Enabled
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
softkey.X.use.dialing
(X ranges from 1 to 10)
0 or 1
0
Description:
It enables or disables the custom soft key X to be displayed in the dialing state.
0-Disabled
1-Enabled