Yealink SIP-T23P User Manual

Advanced Phone Features
121
This chapter provides operating instructions for the advanced features of the SIP-T23P/G
IP phone. Topics include:
 Busy Lamp Field (BLF)
 BLF List
 Call Recording
 Hot Desking
 Intercom
 Multicast Paging
 Music on Hold
 Automatic Call Distribution (ACD)
 Shared Call Appearance (SCA)
 Bridged Line Appearance (BLA)
 Messages
If you require additional information or assistance with your new phone, contact your
system administrator.
You can use BLF to monitor a specific line for status changes on the phone. For example,
you can configure a BLF key on the phone to monitor the status of a friend’s line (busy or
idle). The BLF key LED illuminates solid red when the friend's line is in use. For more
information on BLF key LED indicators, refer to LED Instructions on page 14.
You can press a BLF key to dial out the monitored phone number when the monitored
line is idle. You can receive a visual or/and an audio alert (if enabled), and also pick up
calls that are received on the monitored line. For more information, contact your system
administrator.
To configure a BLF key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.

Yealink SIP-T23P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Display resolution	132 x 64 pixels
Ethernet LAN (RJ-45) ports	2
Security algorithms	HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Voice codecs	CNG, G.711a, G.722, G.726, G.729ab, VAD
Phonebook capacity	1000 entries