Yealink SIP-T23P User Manual

Basic Call Features
93
You can use auto answer feature to automatically answer an incoming call on a line.
Auto answer is configurable on a per-line basis.
To configure auto answer via phone user interface:
1. Press Menu->Features->Auto Answer.
2. Press or , or the Switch soft key to select the desired account from the Line
ID field.
3. Press or , or the Switch soft key to select Enabled from the Status field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon appears on the LCD screen.
Auto answer is configurable via web user interface at the path Account->Basic.
Note
You can enable auto redial to automatically redial a phone number when the called
party is busy. You can also configure the number of auto redial attempts and the time to
wait between redial attempts.
Auto answer is only applicable when there is no other call in progress on the phone.

Yealink SIP-T23P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Display resolution	132 x 64 pixels
Ethernet LAN (RJ-45) ports	2
Security algorithms	HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Voice codecs	CNG, G.711a, G.722, G.726, G.729ab, VAD
Phonebook capacity	1000 entries