EasyManuals Logo
Home>Yealink>IP Phone>SIP-T23P

Yealink SIP-T23P User Manual

Yealink SIP-T23P
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
User Guide for the SIP-T23P/G IP Phone
52
contact in local directory or the Cancel soft key to cancel.
For more information on remote phone book operating, refer to Remote Phone Book on
page 59.
To edit a contact in the local directory:
1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory (refer to Directory on page 46),
press Menu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select All Contacts and then press the Enter soft
key.
3. Press or to highlight the desired contact.
4. Press the Option soft key, and then select Detail.
5. Press or to highlight the contact information and then edit.
6. Press the Save soft key to accept change or the Back soft key to cancel.
To delete a contact from the local directory:
1. Press the Dir soft key.

Other manuals for Yealink SIP-T23P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T23P and is the answer not in the manual?

Yealink SIP-T23P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Display resolution132 x 64 pixels
Ethernet LAN (RJ-45) ports2
Security algorithmsHTTPS
Ethernet LAN data rates10, 100 Mbit/s
Voice codecsCNG, G.711a, G.722, G.726, G.729ab, VAD
Phonebook capacity1000 entries

Related product manuals