EasyManua.ls Logo

Yealink SIP-T28

Yealink SIP-T28
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Yealink SIP Phones’ Firmware Change Log
2/20
1 New Features
1. Added auto provision code feature.
2. Added Headset Priority feature.
3. Added Dual Headset feature.
4. Added Multicast IP Paging feature.
5. Added CosmoCom ACD and synchronization feature.
6. Added Music on hold server feature.
7. Added SNMP feature.
8. Added display name for call forward feature.
9. Supported Caller-ID display from remote phonebook.
10. Added display XML information from SIP Notify message feature.
2 Optimization
1. Added account registration status in the webpageStatus.
2. If you modify something on the webpage during a call, the phone will prompt
“Talking…Please update later”, after that it will return to the previous interface.
3. Compatible with IE9 browser.
4. Added CosmoCom type in the “SIP Server Type”.
5. When “Inband” or “RFC2833” was selected in the DTMF type, “How to info DTMF” can’t
be configured.
6. Added “PlayHoldTone” and “PlayHoldToneDelay” configuration.
7. Added “DsskeyBlindTran” configuration.
8. Added “DTMFReplaceTran” and “Tran Send DTMF” configuration.
9. Added “AllowMute” configuration to configure whether allow muting during the call.
10. Added “Handset Send Volume” and “Handfree Send Volume” configuration.
11. Added “SendPoundKey” configuration. If “SendPoundKey” is enabled, and select “#” as send
key, “##” can be send out.
12. Added “AutoAnswerDelay” configuration in the webpagePhoneFeatures.
13. Added “DHCP Option Value” configuration.
14. Auto configuration of first account.
15. Enabled encryption/decryption password.
16. Direct conference function.
17. Username and Password stays in the same interface when login ACD.
18. Transfer cancel configuration.
19. Enter the FWD configuration page when pressing FWD key.
20. The DND, Forward, Anonymous Code will only be sent when the status changed.
21. Added “BLFListBargeInCode” configuration.
22. Display HD characters.
23. Configurable HotDesking feature.
24. Added “NewCall” soft key when holding the call.
25. Auto answer when receiving the special NOTIFY message from Asterisk server.
26. Different dial tone when account is not registered.

Other manuals for Yealink SIP-T28

Related product manuals