Yealink SIP- T28P Setup Guide

PaloSanto Solutions
Yealink SIP-T28P Server Setup Guide
9
AUTOPROVISIONING USING ELASTIX’S ENDPOINT
CONFIGURATOR
1. In the Yealink SIP-T28P WebUI, go to “Upgrade => Advance” section and set the
following parameters (Figure 4.10):
 Custom option type: IP Address
 URL: Elastix Server IP Address (192.168.1.65 in this example)
 Check New Config: Power On
Figure 4.10 Upgrade
2. Click on “Confirm” button. In the Elastix WebUI go to “PBX => Endpoint
Configurator” (Figure 4-11).
Figure 4.11 Endpoint Configurator
3. Next to the “Discover Endpoints in this Network” button, type the address where
the phone is located and hit Enter (or click the button). This will generate a list with
all the phones available in that network (Figure 4-12).

Yealink SIP- T28P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	48
Voice codecs	G.711, G.722, G.723.1, G.726
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Display resolution	320 x 160 pixels
Lines quantity	- lines
Phonebook capacity	- entries
Number of VoIP accounts	6
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g