Yealink SIP-T30G User Manual

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
405
Values
1-On, incoming calls are forwarded to the destination number (configured by the parameter “for-
ward.busy.target”) when the callee is busy.
Default
0
Web UI
Features > Forward&DND > Forward > Busy Forward > On/Off
Phone UI
Menu > Features > Call Forward > Busy Forward > Busy Forward
Parameter
forward.busy.target <y0000000000xx>.cfg
Description
It configures the destination number of the busy forward on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T30P/T30/T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Busy Forward > Target
Phone UI
Menu > Features > Call Forward > Busy Forward > Forward to
Parameter
forward.busy.on_code <y0000000000xx>.cfg
Description
It configures the busy forward on code to activate the server-side busy forward feature.
The phone will send the busy forward on code and the pre-configured destination number (configured
by the parameter “forward.busy.target”) to the server when you activate the busy forward feature on a
phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T30P/T30/T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Busy Forward > On Code
Phone UI
Menu > Features > Call Forward > Busy Forward > On Code
Parameter
forward.busy.off_code <y0000000000xx>.cfg
Description
It configures the busy forward off code to deactivate the server-side busy forward feature.
The phone will send the busy forward off code to the server when you deactivate the busy forward fea-
ture on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0
(Phone) (except T30P/T30/T19(P) E2/CP920 phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Busy Forward > Off Code
Phone UI
Menu > Features > Call Forward > Busy Forward > Off Code
Parameter
forward.no_answer.enable <y0000000000xx>.cfg
Description
It triggers the no answer forward feature to on or off on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 0

Yealink SIP-T30G Specifications

General

Line Keys	2
SIP Accounts	2
Local Phonebook	1000 entries
HD Audio	Yes
Wall Mountable	Yes
Certifications	CE, FCC, RoHS
Network Ports	2 x 10/100 Mbps Ethernet ports
Power Supply	IEEE 802.3af PoE or 5V DC adapter
Audio Codec	G.711, G.722, G.729, G.723, iLBC
Headset	RJ9 headset port
Supported Protocols	SIP
Languages	English, German, Italian, French, Spanish, Portuguese, Russian, Turkish
Display	2.3-inch (132x64 pixels) LCD