Yealink SIP-T30G

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
437
Visual and Audio Alert for Monitor Lines
LED Mode for BLF/BLF List Key
BLF/BLF List Key LED Status and Behavior Configuration
BLF Key for Intercom Configuration
Call Information Display Configuration
BLF Key Configuration
You can configure a BLF key for a specific line.
The following shows the configuration of a BLF key for Bill.
linekey.X.type=16
linekey.X.line=1
linekey.X.value=1001
linekey.X.label=Bill
Related Topic
Line Keys Configuration
BLF List Configuration
You can configure a BLF List for monitor phone. It enables the monitor phone to subscribe to a list of lines, and
receive status notifications of the monitored lines.
Note: The IP phone subscribes to a BLF list that is set up on the server. You must access the server and set up a list of mon-
itored lines.
The following table lists the parameters you can use to configure BLF List.
Parameter
account.X.blf.blf_list_uri
[1]
<MAC>.cfg
Description
It configures the BLF List URI to monitor a list of users for account X.
Example:
account.1.blf.blf_list_uri = 4609@pbx.test.com
Permitted
Values
SIP URI within 256 characters
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Account > Advanced > BLF List URI
Parameter
account.X.blf_list_code
[1]
<MAC>.cfg
Description
It configures the feature access code that initiates a directed call pickup for account X.
Permitted
Values
String within 32 characters
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Account > Advanced > BLF List Pickup Code
Parameter
account.X.blf_list_barge_in_code
[1]
<MAC>.cfg