Phone Customization
270
105-XML Park
310-Dect Intercom (only applicable to
T57W/T54W/T53W/T53 phones when the DECT
USB dongle is connected)
Note: The permitted values are configurable by “expkey.type_range.custom”.
Default
Y=1-40 or 1-60, default: 0 – NA
Y=1 or 21, default: 37 – Switch, only for T29G/T27G
Y=2-20, 22-40, default: 0 – NA, only for T29G/T27G
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T29G, T27G
Web UI
Dsskey > Ext Key > Type
Parameter
expansion_module.X.key.Y.line
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the ext key feature.
Permitted
Values
T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 0, 1-16;
T53W/T53/T43U: 0, 1-12;
T27G: 0, 1-6;
Note: The permitted value 0 is configurable only when "features.fwd_mode" is set to 1 (Custom) and
"expansion_module.X.key.Y.type" is set to 2 (Forward).
Default
1
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T29G, T27G
Web UI
Dsskey > Ext Key > Line
Parameter
expansion_module.X.key.Y.value
[1]
<y0000000000xx>.cfg
Description
It configures the value for some ext key features.
For example, when you assign the Speed Dial to the programmable key, this parameter is used to spe-
cify the contact number you want to dial out. It is also used to specify the contact number with the
DTMF sequence. The contact number and DTMF sequence are separated by commas.
Permitted
Values
String within 99 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T29G, T27G
Web UI
Dsskey > Ext Key > Value
Parameter
expansion_module.X.key.Y.label
[1]
<y0000000000xx>.cfg
Description
It configures the label displayed on the LCD screen for a specific programmable key.
This is an optional configuration.
Permitted
Values
String within 99 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T29G, T27G
To Next Page
Loading...
Need help?
General
