Yealink SIP-T30P

Phone Customization
292
Custom Icons Configuration
The following table lists the parameters you can use to configure custom icons.
Parameter
phone_setting.icon.url
[1]
<y0000000000xx>.cfg
Description
It configures the access URL of the *.tar file for custom icons.
Permitted
Values
URL within 511 characters
Default
Blank
Supported
Devices
T57W, T54W, T48U, T48S, T46U, T46S
Parameter
phone_setting.icon.delete
[1]
<y0000000000xx>.cfg
Description
It deletes all custom icons.
Permitted
Values
http://localhost/all
Default
Blank
Supported
Devices
T57W, T54W, T48U, T48S, T46U, T46S
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Warnings Display
When one of the following situations occurs:
l The default password is being used
l Account registration failed
l Provisioning credentials are wrong
l Network is unavailable
l Line on redundancy registration
On the T42S/T42U/T41S phones, a warning message appears on the idle screen.
On the other phones, a warning icon appears in the status bar.
Topic
Warnings Display Configuration
Warnings Display Configuration
The following table lists the parameter you can use to configure the warnings display.
Parameter
phone_setting.warnings_display.mode <y0000000000xx>.cfg
Description
It enables or disables the phone to display warnings.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G