Yealink SIP-T30P

Advanced Features
488
Values 1-Enabled
Default
0
Parameter
account.X.sub_fail_retry_interval
[1]
<MAC>.cfg
Description
It configures the interval (in seconds) for the phone to retry to re-subscribe when subscription fails.
Permitted
Values
Integer from 0 to 3600
Default
30
Parameter
account.X.subscribe_mwi_to_vm
[1]
<MAC>.cfg
Description
It enables or disables the phone to subscribe to the message waiting indicator for the voice mail num-
ber.
Note: It works only if “account.X.subscribe_mwi” is set to 1 (Enabled) and “voice_mail.number.X” is
configured.
Permitted
Values
0-Disabled, the phone will subscribe to the message waiting indicator to a specific account.
1-Enabled
Default
0
Web UI
Account > Advanced > Subscribe MWI to Voice Mail
Parameter
voice_mail.number.X
[1]
<MAC>.cfg
Description
It configures the voice mail number.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Account > Advanced > Voice Mail
Phone UI
Menu > Message > Voice Mail > Set Voice Mail Code
Parameter
account.X.display_mwi.enable
[1]
<MAC>.cfg
Description
It enables or disables the MWI alert to indicate that you have an unread voice mail message.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Account > Advanced > Voice Mail Display
Parameter
features.voice_mail_alert.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when receiving the same amount of new
voicemails.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
features.voice_mail_key_lamp_field.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to subscribe to the message waiting indicator for the voice mail num-
ber when configuring a Voice Mail dsskey.