EasyManuals Logo

Yealink SIP-T53 Auto Provisioning Guide

Yealink SIP-T53
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Obtaining the Provisioning Server Address
35
The following figure shows the example messages of obtaining the TFTP server address from an
IPv4 custom DHCP option:
Right click the root node of the custom option (e.g., option 128) shown on the above figure, and
select Copy->Bytes->Printable Text Only. Paste the copied text in your favorite text editor to
check the address, for example, tftp://192.168.1.100/.
Phone Flash
Yealink IP phones can obtain the provisioning server address from the IP phone flash. To obtain
the provisioning server address by reading the IP phone flash, make sure the configuration is set
properly.
To configure the IP phone flash via web user interface:
1. Click on Settings->Auto Provision.

Table of Contents

Other manuals for Yealink SIP-T53

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53 and is the answer not in the manual?

Yealink SIP-T53 Specifications

General IconGeneral
NetworkDual-port Gigabit Ethernet
SIP Accounts12
Lines12
Stand IncludedYes
PoEYes (IEEE 802.3af)
USB Port1 x USB 2.0
Headset SupportRJ9 and USB
Audio FeaturesHD Voice
Expansion Module SupportYes, up to 3
Voice CodecsG.722, G.711
Network FeaturesIPv4/IPv6, VLAN, QoS
Local Phonebook1000 entries
MountingDesk mount, Wall mount
Power SupplyOptional
Weight1.1 kg
Resolution360 x 160

Related product manuals