EasyManuals Logo

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #261 background imageLoading...
Page #261 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
258
Phone UI
Menu > Features > DSS Keys > Line Key X > Label
Parameter
linekey.X.extension
[1]
<y0000000000xx>.cfg
Descrip-
tion
For multicast paging:
It configures the channel of the multicast paging group.
For the BLF/BLF list/intercom feature:
It configures the pickup code.
Note: It is only applicable when “linekey.X.type is set to 14, 16, 24 or 39.
Permitted
Values
For multicast paging:
0 to 31
For the BLF/BLF list/intercom feature:
String within 256 characters
Default
Blank
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Dsskey > Line Key > Line KeyX > Extension
Phone UI
Menu > Features > DSS Keys > Line Key X > Channel or
Menu > Features > DSS Keys > Line Key X > PIN/ID or
Menu > Features > DSS Keys > Line Key X > Extension
Parameter
linekey.X.xml_phonebook
[1]
<y0000000000xx>.cfg
Descrip-
tion
It specifies a specific group/phone book when multiple groups/phone books are configured on the
phone.
For example, both Remote Phone Book 1 “Sell and Remote Phone Book 2 “Market” are configured on
the phone, you can configure “linekey.X.xml_phonebook = 0” to specify the Remote Phone Book 1
“Sell for the specific line key. The user can press this line key to access the Remote Phone Book 1
“Sell”.
Note: It is only applicable when “linekey.X.type is set to 22 or 45.
Permitted
Values
Integer from 0 to 48
Default
0
Supported
Devices
All phones except T19(P) E2 and CP920
Web UI
Dsskey > Line Key > Line KeyX > Line
Parameter
features.flash_url_dsskey_led.enable <y0000000000xx>.cfg
Descrip-
tion
It enables or disables the LED indicator of the URL DSS key.
The LED indicator behavior depends on the response message from the server when you press the
URL DSS key on the phone.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals