EasyManuals Logo

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #524 background imageLoading...
Page #524 background image
Configuration Parameters
521
Broadsoft Visual Voice Mail
Parameter
bw.voice_mail.visual.enable <y0000000000xx>.cfg
Description
It enables or disables the visual voice mail feature for the phone.
Note: It works only if “bw.xsi.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
bw.voice_mail.visual.display_videomail.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the video mails in the voice mail list.
Note: It works only if "bw.xsi.enable" and "bw.voice_mail.visual.enable" are set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
voice_mail.message_key.mode <y0000000000xx>.cfg
Description
It configures the phone behavior when pressing the MESSAGE key when the phone is idle.
Permitted
Values
0-enter the Set Voice Mail Code screen if the voice mail access code has not been configured; dial
out the voice mail access code if the voice mail access code has been configured.
1-enter the View Voice Mail screen
Default
0
Broadsoft SCA
Parameter
account.X.share_line.barge_in.enable
[1]
<MAC>.cfg
Description
It enables or disables the users to interrupt/barge into an active call on the shared line.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.shared_line_one_touch_bargein.en-
able
[1]
<MAC>.cfg
Description
It enables or disables the phone to barge in the call between remote shared line party and the third
party by pressing the line key.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.shared_line_one_touch_retrieve.en-
able
[1]
<MAC>.cfg
Description
It enables or disables the phone to retrieve the public held call on remote shared line party phone by
pressing the line key.
Permitted
0-Disabled

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals