EasyManuals Logo

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #390 background imageLoading...
Page #390 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
387
manually.
Default
1
Supported
Devices
All phones except CP920
Parameter
features.dnd.emergency_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to receive incoming calls from authorized numbers when the DND
feature is enabled.
Note: The authorized numbers are configured by the parameter “features.dnd.emergency_author-
ized_number”. It works only if “features.dnd.allow” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features > Forward&DND > DND > DND Emergency
Parameter
features.dnd.emergency_authorized_number <y0000000000xx>.cfg
Description
It configures the authorized numbers the phone can receive incoming calls from even if DND feature
is activated.
Multiple numbers are separated by commas.
Example:
features.dnd.emergency_authorized_number = 123,124
Note: It works only if “features.dnd.allow and “features.dnd.emergency_enable” are set to 1
(Enabled).
Permitted
Values
String within 511 characters
Default
Blank
Web UI
Features > Forward&DND > DND > DND Authorized Numbers
Parameter
features.dnd_refuse_code <y0000000000xx>.cfg
Description
It configures a return code and reason of SIP response messages when rejecting an incoming call by
DND. A specific reason is displayed on the caller’s phone screen.
Note: It works only if “features.dnd.allow is set to 1 (Enabled).
Permitted
Values
404-Not Found
480-Temporarily Unavailable
486-Busy Here, the caller’s phone screen will display the reason “Busy Here” when the callee
enables DND feature.
600-Busy Everywhere
603-Decline
Default
480
Web UI
Features > General Information > Return Code When DND
Parameter
features.dnd.large_icon.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display a large DND icon on the idle screen.
Note: It works only if “features.dnd.allow is set to 1 (Enabled).

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals