EasyManuals Logo

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #513 background imageLoading...
Page #513 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
510
Values
Default
Blank
Parameter
account.X.call_center.call_info_enable
[1]
<MAC>.cfg
Description
It enables or disables the call center call information feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.call_center.show_call_info_time
[1]
<MAC>.cfg
Description
It configures the interval (in seconds) to specify how long the call center call information displays.
Note: It works only if "account.X.call_center.call_info_enable" is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 86400
Default
30
Parameter
account.X.call_center.disp_code_enable
[1]
<MAC>.cfg
Description
It enables or disables the disposition code feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.call_center.trace_enable
[1]
<MAC>.cfg
Description
It enables or disables the customer originated trace feature.
Permitted
Values
0-Disabled
1-Enabled, it is used to trace the origin of an obscene, harassing, or threatening call.
Default
0
Parameter
account.X.call_center.emergency_enable
[1]
<MAC>.cfg
Description
It enables or disables the emergency escalation feature.
Permitted
Values
0-Disabled
1-Enabled, it provides the capability for the call center agent to immediately escalate a call to a super-
visor by pressing a key on the phone. The supervisor is immediately joined into the call.
Default
0
Parameter
account.X.call_center.queue_status_enable
[1]
<MAC>.cfg
Description
It enables or disables the queue status notification feature.
Permitted
Values
0-Disabled
1-Enabled, it enables the agent to view the status of the call center queue on the phone. The queue
can be in one of three states: empty, Q'ing and ALERT.
Default
0
Parameter
account.X.call_center.queue_status_light_enable
[1]
<MAC>.cfg
Description
It enables or disables the power LED indicator to flash when the ACD calls in the queue have

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals